|
|
| Line 1: |
Line 1: |
| − | Use the default LCDd.conf that gets installed with the lcdproc package.
| + | LCDd |
| − | | |
| − | Change the line
| |
| − | {{{
| |
| − | Driver=curses
| |
| − | }}}
| |
| − | to
| |
| − | {{{
| |
| − | Driver=imon
| |
| − | }}}
| |
| − | | |
| − | Create a file lirc.conf in /etc/modprobe.d with the following content, this will make sure the soundgraph imon is recognized as a vfd (rather than an lcd)
| |
| − | | |
| − | {{{
| |
| − | options lirc_imon display_type=1
| |
| − | }}}
| |
| − | | |
| − | {{{
| |
| − | # LCDd.conf -- configuration file for the LCDproc server daemon LCDd
| |
| − | #
| |
| − | # This file contains the configuration for the LCDd server.
| |
| − | #
| |
| − | # The format is ini-file-like. It is divided into sections that start at
| |
| − | # markers that look like [section]. Comments are all line-based comments,
| |
| − | # and are lines that start with '#' or ';'.
| |
| − | #
| |
| − | # The server has a 'central' section named [server]. For the menu there is
| |
| − | # a section called [menu]. Further each driver has a section which
| |
| − | # defines how the driver acts.
| |
| − | #
| |
| − | # The drivers are activated by specifiying them in a driver= line in the
| |
| − | # server section, like:
| |
| − | #
| |
| − | #
| |
| − | # This tells LCDd to use the curses driver.
| |
| − | # The first driver that is loaded and is capable of output defines the
| |
| − | # size of the display. The default driver to use is curses.
| |
| − | # If the driver is specified using the -d <driver> command line option,
| |
| − | # the Driver= options in the config file are ignored.
| |
| − | #
| |
| − | # The drivers read their own options from the respective sections.
| |
| − | | |
| − | | |
| − | | |
| − | ## Server section with all kinds of settings for the LCDd server ##
| |
| − | [server]
| |
| − | | |
| − | # Where can we find the driver modules ?
| |
| − | # IMPORTANT: Make sure to change this setting to reflect your
| |
| − | # specific setup! Otherwise LCDd won't be able to find
| |
| − | # the driver modules and will thus not be able to
| |
| − | # function properly.
| |
| − | # NOTE: Always place a slash as last character !
| |
| − | DriverPath=/usr/lib/lcdproc/
| |
| − | | |
| − | # Tells the server to load the given drivers. Multiple lines can be given.
| |
| − | # The name of the driver is case sensitive and determines the section
| |
| − | # where to look for further configuration options of the specific driver
| |
| − | # as well as the name of the dynamic driver module to load at runtime.
| |
| − | # The latter one can be changed by giving af File= directive in the
| |
| − | # driver specific section.
| |
| − | #
| |
| − | # The following drivers are supported:
| |
| − | # bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65,
| |
| − | # EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, imonlcd, IOWarrior,
| |
| − | # irman, joy, lb216, lcdm001, lcterm, lirc, lis, MD8800, ms6931, mtc_s16209x,
| |
| − | # MtxOrb, mx5000, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
| |
| − | # serialVFD, shuttleVFD, sli, stv5730, svga, t6963, text, tyan, ula200,
| |
| − | # xosd
| |
| − | Driver=imon
| |
| − | | |
| − | # Tells the driver to bind to the given interface
| |
| − | Bind=127.0.0.1
| |
| − | | |
| − | # Listen on this specified port; defaults to 13666.
| |
| − | Port=13666
| |
| − | | |
| − | # Sets the reporting level; defaults to 2 (warnings and errors only).
| |
| − | #ReportLevel=3
| |
| − | | |
| − | # Should we report to syslog instead of stderr ? [default: no; legal: yes, no]
| |
| − | #ReportToSyslog=yes
| |
| − | | |
| − | # User to run as. LCDd will drop its root priviledges, if any,
| |
| − | # and run as this user instead.
| |
| − | User=nobody
| |
| − | | |
| − | # The server will stay in the foreground if set to true.
| |
| − | #Foreground=no
| |
| − | | |
| − | # Hello message: each entry represents a display line; default: builtin
| |
| − | #Hello=" Welcome to"
| |
| − | #Hello=" LCDproc!"
| |
| − | | |
| − | # GoodBye message: each entry represents a display line; default: builtin
| |
| − | #GoodBye="Thanks for using"
| |
| − | #GoodBye=" LCDproc!"
| |
| − | | |
| − | # Sets the default time in seconds to displays a screen.
| |
| − | WaitTime=5
| |
| − | | |
| − | # If yes, the the serverscreen will be rotated as a usual info screen. If no,
| |
| − | # it will be a background screen, only visible when no other screens are
| |
| − | # active. The special value 'blank' is similar to no, but only a blank screen
| |
| − | # is displayed. [default: on; legal: on, off, blank]
| |
| − | #ServerScreen=no
| |
| − | | |
| − | # Set master backlight setting. If set to 'open' a client may control the
| |
| − | # backlight for its own screens (only). [default: open; legal: off, open, on]
| |
| − | #Backlight=open
| |
| − | | |
| − | # Set master heartbeat setting. If set to 'open' a client may control the
| |
| − | # heartbeat for its own screens (only). [default: open; legal: off, open, on]
| |
| − | #Heartbeat=open
| |
| − | | |
| − | # set title scrolling speed [default: 10; legal: 0-10]
| |
| − | #TitleSpeed=10
| |
| − | | |
| − | # The "...Key=" lines define what the server does with keypresses that
| |
| − | # don't go to any client.
| |
| − | # These are the defaults:
| |
| − | ToggleRotateKey=Enter
| |
| − | PrevScreenKey=Left
| |
| − | NextScreenKey=Right
| |
| − | #ScrollUpKey=Up
| |
| − | #ScrollDownKey=Down
| |
| − | | |
| − | # If you have only 4 keys, you can choose to use this:
| |
| − | #ToggleRotateKey=Enter
| |
| − | #PrevScreenKey=Up
| |
| − | #NextScreenKey=Down
| |
| − | | |
| − | # If you have only 3 keys, you can choose to use this:
| |
| − | #ToggleRotateKey=Enter
| |
| − | #PrevScreenKey=Up
| |
| − | | |
| − | | |
| − | | |
| − | ## The menu section. The menu is an internal LCDproc client. ##
| |
| − | [menu]
| |
| − | # You can configure what keys the menu should use. Note that the MenuKey
| |
| − | # will be reserved exclusively, the others work in shared mode.
| |
| − | | |
| − | # The following works excellent with 4 keys or more.
| |
| − | MenuKey=Escape
| |
| − | EnterKey=Enter
| |
| − | UpKey=Up
| |
| − | DownKey=Down
| |
| − | # If you have 6 keys you may define these as well
| |
| − | #LeftKey=Left
| |
| − | #RightKey=Right
| |
| − | | |
| − | # If you have only 3 keys, you could use something like this:
| |
| − | #MenuKey=Escape
| |
| − | #EnterKey=Enter
| |
| − | #DownKey=Down
| |
| − | | |
| − | | |
| − | | |
| − | ### Driver sections are below this line, in alphabetical order ###
| |
| − | | |
| − | | |
| − | ## EMAC BayRAD driver ##
| |
| − | [bayrad]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
| |
| − | Speed=9600
| |
| − | | |
| − | | |
| − | | |
| − | ## CrystalFontz driver (for CF632 & CF634) ##
| |
| − | [CFontz]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/ttyS0
| |
| − | # Select the LCD size [default: 20x4]
| |
| − | Size=20x4
| |
| − | # Set the initial contrast [default: 560; legal: 0 - 1000]
| |
| − | Contrast=350
| |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=0
| |
| − | # Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
| |
| − | Speed=9600
| |
| − | # Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
| |
| − | NewFirmware=no
| |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | # normally you shouldn't need this
| |
| − | Reboot=no
| |
| − | | |
| − | | |
| − | | |
| − | ## CrystalFontz633 driver (for CF633 only) ##
| |
| − | [CFontz633]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/ttyS0
| |
| − | # Select the LCD type (size) [default: 16x2]
| |
| − | Size=16x2
| |
| − | # Set the initial contrast [default: 560; legal: 0 - 1000]
| |
| − | Contrast=350
| |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=50
| |
| − | # Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
| |
| − | Speed=19200
| |
| − | # Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
| |
| − | # Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
| |
| − | #NewFirmware=no
| |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | # I want to reboot the LCD to make sure we start from a known state
| |
| − | Reboot=yes
| |
| − | | |
| − | | |
| − | | |
| − | ## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
| |
| − | [CFontzPacket]
| |
| − | | |
| − | # Select the LCD model [default: 633; legal: 631, 633, 635]
| |
| − | Model=635
| |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/ttyUSB0
| |
| − | # Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
| |
| − | Size=20x4
| |
| − | # Set the initial contrast [default: 560; legal: 0 - 1000]
| |
| − | Contrast=350
| |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=50
| |
| − | # Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
| |
| − | Speed=115200
| |
| − | # Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
| |
| − | # Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
| |
| − | #NewFirmware=no
| |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | # I want to reboot the LCD to make sure we start from a known state
| |
| − | Reboot=yes
| |
| − | | |
| − | | |
| − | | |
| − | ## Curses driver ##
| |
| − | [curses]
| |
| − | | |
| − | # color settings
| |
| − | # foreground color [default: blue]
| |
| − | Foreground=blue
| |
| − | # background color when "backlight" is off [default: cyan]
| |
| − | Background=cyan
| |
| − | # background color when "backlight" is on [default: red]
| |
| − | Backlight=red
| |
| − | | |
| − | # display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # What position (X,Y) to start the left top corner at...
| |
| − | # Default: (7,7)
| |
| − | TopLeftX=7
| |
| − | TopLeftY=7
| |
| − | | |
| − | # use ASC symbols for icons & bars [default: no; legal, yes, no]
| |
| − | UseACS=no
| |
| − | | |
| − | # draw Border [default: yes; legal: yes, no]
| |
| − | DrawBorder=yes
| |
| − | | |
| − | | |
| − | | |
| − | ## Cwlinux driver ##
| |
| − | [CwLnx]
| |
| − | | |
| − | # Select the LCD model [default: 12232; legal: 12232, 12832, 1602]
| |
| − | Model=12232
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/ttyUSB0
| |
| − | | |
| − | # Select the LCD size [default: depending on model: 12232: 20x4, 12832: 21x4, 1602: 16x2]
| |
| − | Size=20x4
| |
| − | | |
| − | # Set the communication speed [default: 19200; legal: 9600, 19200]
| |
| − | Speed=19200
| |
| − | | |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | # normally you shouldn't need this
| |
| − | Reboot=no
| |
| − | | |
| − | # If you have a keypad connected. Keypad layout is currently not
| |
| − | # configureable from the config file.
| |
| − | Keypad=yes
| |
| − | | |
| − | # If you have a non-standard keypad you can associate any keystrings to keys.
| |
| − | # There are 6 input keys in the CwLnx hardware that generate characters
| |
| − | # from 'A' to 'F'.
| |
| − | #
| |
| − | # The following is the built-in default mapping hardcoded in the driver.
| |
| − | # You can leave those unchanged if you have a standard keypad.
| |
| − | # You can change it if you want to report other keystrings or have a non
| |
| − | # standard keypad.
| |
| − | # KeyMap_A=Up
| |
| − | # KeyMap_B=Down
| |
| − | # KeyMap_C=Left
| |
| − | # KeyMap_D=Right
| |
| − | # KeyMap_E=Enter
| |
| − | # KeyMap_F=Escape
| |
| − | | |
| − | # keypad_test_mode permits to test keypad assignement
| |
| − | # Default value is no
| |
| − | #keypad_test_mode=yes
| |
| − | | |
| − | | |
| − | | |
| − | ## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
| |
| − | [ea65]
| |
| − | | |
| − | # Device is fixed /dev/ttyS1
| |
| − | # Width and Height are fixed 9x1
| |
| − | | |
| − | # As the VFD is self luminescent we don't have a backlight
| |
| − | # But we can use the backlight functions to control the front LEDs
| |
| − | # Brightness 0 to 299 -> LEDs off
| |
| − | # Brightness 300 to 699 -> LEDs half bright
| |
| − | # Brightness 700 to 1000 -> LEDs full bright
| |
| − | Brightness=500
| |
| − | # OffBrightness is the the value used for the 'backlight off' state
| |
| − | OffBrightness=0
| |
| − | | |
| − | | |
| − | | |
| − | ## EyeboxOne driver ##
| |
| − | [EyeboxOne]
| |
| − | | |
| − | # Select the output device to use [default: /dev/ttyS1]
| |
| − | #Device=/dev/cua01
| |
| − | Device=/dev/ttyS1
| |
| − | | |
| − | # Set the display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # Switch on the backlight? [default: yes]
| |
| − | Backlight=yes
| |
| − | | |
| − | # Switch on the cursor? [default: no]
| |
| − | Cursor=no
| |
| − | | |
| − | # Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
| |
| − | Speed=19200
| |
| − | | |
| − | # Enter Key is a \r character, so it's hardcoded in the driver
| |
| − | LeftKey=D
| |
| − | RightKey=C
| |
| − | UpKey=A
| |
| − | DownKey=B
| |
| − | EscapeKey=P
| |
| − | | |
| − | # You can find out which key of your display sends which
| |
| − | # character by setting keypad_test_mode to yes and running
| |
| − | # LCDd. LCDd will output all characters it receives.
| |
| − | # Afterwards you can modify the settings above and set
| |
| − | # keypad_set_mode to no again.
| |
| − | keypad_test_mode=no
| |
| − | | |
| − | | |
| − | | |
| − | ## g15 driver for Logitech G15 Keyboard LCDs ##
| |
| − | [g15]
| |
| − | | |
| − | # Display size (currently unused)
| |
| − | size=20x5
| |
| − | | |
| − | | |
| − | | |
| − | ## glcdlib meta driver for graphical LCDs ##
| |
| − | [glcdlib]
| |
| − | | |
| − | ## mandatory:
| |
| − | | |
| − | # which graphical display supported by graphlcd-base to use [default: image]
| |
| − | # (see /etc/graphlcd.conf for possible drivers)
| |
| − | Driver=noritake800
| |
| − | | |
| − | # no=use graphlcd bitmap fonts (they have only one size / font file)
| |
| − | # yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
| |
| − | UseFT2=yes
| |
| − | | |
| − | # text resolution in fixed width characters [default: 16x4]
| |
| − | # (if it won't fit according to available physical pixel resolutioni
| |
| − | # and the minimum available font face size in pixels, then
| |
| − | # 'DebugBorder' will automatically be turned on)
| |
| − | TextResolution=20x4
| |
| − | | |
| − | # path to font file to use
| |
| − | FontFile=/usr/share/fonts/corefonts/courbd.ttf
| |
| − | | |
| − | ## these only apply if UseFT2=yes:
| |
| − | | |
| − | # character encoding to use
| |
| − | CharEncoding=iso8859-2
| |
| − | | |
| − | # minumum size in pixels in which fonts should be rendered
| |
| − | MinFontFaceSize=7x12
| |
| − | | |
| − | ## optional:
| |
| − | Brightness=50 # Brightness (in %) if applicable
| |
| − | Contrast=50 # Contrast (in %) if applicable
| |
| − | Backlight=no # Backlight if applicable
| |
| − | UpsideDown=no # flip image upside down
| |
| − | Invert=no # invert light/dark pixels
| |
| − | ShowDebugFrame=no # turns on/off 1 pixel thick debugging
| |
| − | # border whithin the usable text area,
| |
| − | # for setting up TextResolution and
| |
| − | # MinFontFaceSize (if using FT2);
| |
| − | ShowBigBorder=no # border around the unused area
| |
| − | ShowThinBorder=yes # border around the unused area
| |
| − | PixelShiftX=0
| |
| − | PixelShiftY=2
| |
| − | | |
| − | | |
| − | | |
| − | ## Matrix Orbital GLK driver ##
| |
| − | [glk]
| |
| − | | |
| − | # select the serial device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # set the initial contrast value [default: 560; legal: 0 - 1000]
| |
| − | Contrast=560
| |
| − | | |
| − | # set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
| |
| − | Speed=19200
| |
| − | | |
| − | | |
| − | | |
| − | ## Hitachi HD44780 driver ##
| |
| − | [hd44780]
| |
| − | | |
| − | # Select what type of connection. See documentation for types.
| |
| − | ConnectionType=4bit
| |
| − | | |
| − | # Port where the LPT is [ususal: 0x278, 0x378 and 0x3BC]
| |
| − | Port=0x378
| |
| − | | |
| − | # Device of the serial interface [default: /dev/lcd]
| |
| − | Device=/dev/ttyS0
| |
| − | | |
| − | # Bitrate of the serial port (0 for interface default)
| |
| − | Speed=0
| |
| − | | |
| − | # If you have a keypad connected.
| |
| − | # You may also need to configure the keypad layout further on in this file.
| |
| − | Keypad=no
| |
| − | | |
| − | # Set the initial contrast (bwctusb and lcd2usb) [default: 500; legal: 0 - 1000]
| |
| − | Contrast=0
| |
| − | | |
| − | # Set brightness of the backlight (lcd2usb only) [default: 0; legal 0 - 1000]
| |
| − | #Brightness=1000
| |
| − | #OffBrightness=0
| |
| − | | |
| − | # If you have a switchable backlight.
| |
| − | Backlight=no
| |
| − | | |
| − | # If you have the additional output port ("bargraph") and you want to
| |
| − | # be able to control it with the lcdproc OUTPUT command
| |
| − | OutputPort=no
| |
| − | | |
| − | # Specifies if the last line is pixel addressable or it controls an
| |
| − | # underline effect. [default: true (= pixel addressable); legal: yes, no]
| |
| − | #Lastline=true
| |
| − | | |
| − | # Specifies the size of the LCD.
| |
| − | # In case of multiple combined displays, this should be the total size.
| |
| − | Size=20x4
| |
| − | | |
| − | # For multiple combined displays: how many lines does each display have.
| |
| − | # Vspan=2,2 means both displays have 2 lines.
| |
| − | #vspan=2,2
| |
| − | | |
| − | # If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
| |
| − | # set this flag to get into extended mode (4-line linear).
| |
| − | #ExtendedMode=yes
| |
| − | | |
| − | # In extended mode, on some controllers like the ST7036 (in 3 line mode)
| |
| − | # the next line in DDRAM won't start 0x20 higher. [default: 0x20]
| |
| − | #LineAddress=0x10
| |
| − | | |
| − | # Character map to to map ISO-8859-1 to the LCD's character set
| |
| − | # [default: hd44780_default; legal: hd44780_default, hd44780_euro,
| |
| − | # ea_ks0073, sed1278f_0b ]
| |
| − | CharMap=hd44780_default
| |
| − | | |
| − | # If your display is slow and cannot keep up with the flow of data from
| |
| − | # LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
| |
| − | # to increase the delays. Default: 1.
| |
| − | #DelayMult=2
| |
| − | | |
| − | # Some displays (e.g. vdr-wakeup) need a message from the driver to that it
| |
| − | # is still alive. When set to a value bigger then null the character in the
| |
| − | # upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
| |
| − | #KeepAliveDisplay=0
| |
| − | | |
| − | # If you experience occasional garbage on your display you can use this
| |
| − | # option as workaround. If set to a value bigger than null it forces a
| |
| − | # full screen refresh <RefreshDiplay> seconds. Default: 0.
| |
| − | #RefreshDisplay=5
| |
| − | | |
| − | # You can reduce the inserted delays by setting this to false.
| |
| − | # On fast PCs it is possible your LCD does not respond correctly.
| |
| − | # Default: true.
| |
| − | DelayBus=true
| |
| − | | |
| − | # If you have a keypad you can assign keystrings to the keys.
| |
| − | # See documentation for used terms and how to wire it.
| |
| − | # For example to give directly connected key 4 the string "Enter", use:
| |
| − | # KeyDirect_4=Enter
| |
| − | # For matrix keys use the X and Y coordinates of the key:
| |
| − | # KeyMatrix_1_3=Enter
| |
| − | KeyMatrix_4_1=Enter
| |
| − | KeyMatrix_4_2=Up
| |
| − | KeyMatrix_4_3=Down
| |
| − | KeyMatrix_4_4=Escape
| |
| − | | |
| − | | |
| − | | |
| − | ## ICP A106 driver ##
| |
| − | [icp_a106]
| |
| − | Device=/dev/ttyS1
| |
| − | | |
| − | | |
| − | | |
| − | ## Code Mercenaries IO-Warrior driver ##
| |
| − | [IOWarrior]
| |
| − | | |
| − | # display dimensions
| |
| − | Size=20x4
| |
| − | | |
| − | # serial number [exactly as listed by usbview]
| |
| − | # (if not given, the 1st IOWarrior found gets used)
| |
| − | #SerialNumber=00000674
| |
| − | | |
| − | # If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
| |
| − | # set this flag to get into extended mode (4-line linear).
| |
| − | #ExtendedMode=yes
| |
| − | | |
| − | # Specifies if the last line is pixel addressable or it controls an
| |
| − | # underline effect. [default: true (= pixel addressable); legal: yes, no]
| |
| − | #Lastline=true
| |
| − | | |
| − | | |
| − | | |
| − | ## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
| |
| − | [imon]
| |
| − | | |
| − | # select the device to use
| |
| − | Device=/dev/lcd0
| |
| − | | |
| − | # display dimensions
| |
| − | Size=16x2
| |
| − | | |
| − | | |
| − | | |
| − | ## Soundgraph iMON LCD ##
| |
| − | [imonlcd]
| |
| − | # Specify which iMon protocol should be used [legal: 0=15c2:ffdc device,
| |
| − | # 1=15c2:0038 device; default: 0]
| |
| − | Protocol=0
| |
| − | | |
| − | # Set the exit behavior [legal: 0=leave shutdown message, 1=show the big clock,
| |
| − | # 2=blank device; default: 1]
| |
| − | #OnExit=2
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd0]
| |
| − | Device=/dev/lcd0
| |
| − | | |
| − | # Select the displays contrast [default: 200; legal: 0-1000]
| |
| − | Contrast=200
| |
| − | | |
| − | # Specify the size of the display in pixels [default: 96x16]
| |
| − | #Size=96x16
| |
| − | | |
| − | # Set the backlight state [default: on; legal: on, off]
| |
| − | Backlight=on
| |
| − | | |
| − | # Set the disc mode [legal: 0=spin the "slim" disc - two disc segments,
| |
| − | # 1=their complement spinning; default: 0]
| |
| − | #DiscMode=0
| |
| − | | |
| − | | |
| − | | |
| − | ## IrMan driver ##
| |
| − | [IrMan]
| |
| − | # in case of trouble with IrMan, try the Lirc emulator for IrMan
| |
| − | | |
| − | # Select the input device to use
| |
| − | #Device=/dev/irman
| |
| − | | |
| − | # Select the configuration file to use
| |
| − | #Config=/etc/irman.cfg
| |
| − | | |
| − | | |
| − | | |
| − | ## IRtrans driver ##
| |
| − | [irtrans]
| |
| − | | |
| − | # Does the device have a backlight? [default: no; legal: yes, no]
| |
| − | #Backlight=no
| |
| − | | |
| − | # IRTrans device to connect to [default: localhost]
| |
| − | #Hostname=localhost
| |
| − | | |
| − | # display dimensions
| |
| − | Size=16x2
| |
| − | | |
| − | | |
| − | | |
| − | ## Joystick driver ##
| |
| − | [joy]
| |
| − | | |
| − | # Select the input device to use [default: /dev/js0]
| |
| − | Device=/dev/js0
| |
| − | | |
| − | # set the axis map
| |
| − | Map_Axis1neg=Left
| |
| − | Map_Axis1pos=Right
| |
| − | Map_Axis2neg=Up
| |
| − | Map_Axis2pos=Down
| |
| − | | |
| − | # set the button map
| |
| − | Map_Button1=Enter
| |
| − | Map_Button2=Escape
| |
| − | | |
| − | | |
| − | | |
| − | ## LB216 driver ##
| |
| − | [lb216]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Set the initial brightness [default: 255; legal: 0 - 255]
| |
| − | Brightness=255
| |
| − | | |
| − | # Set the communication speed [default: 9600; legal: 2400, 9600]
| |
| − | Speed=9600
| |
| − | | |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | Reboot=no
| |
| − | | |
| − | | |
| − | | |
| − | ## LCDM001 driver ##
| |
| − | [lcdm001]
| |
| − | | |
| − | Device=/dev/ttyS1
| |
| − | | |
| − | # keypad settings
| |
| − | # Keyname Function
| |
| − | # Normal context Menu context
| |
| − | # ------- -------------- ------------
| |
| − | # PauseKey Pause/Continue Enter/select
| |
| − | # BackKey Back(Go to previous screen) Up/Left
| |
| − | # ForwardKey Forward(Go to next screen) Down/Right
| |
| − | # MainMenuKey Open main menu Exit/Cancel
| |
| − | PauseKey=LeftKey
| |
| − | BackKey=UpKey
| |
| − | ForwardKey=DownKey
| |
| − | MainMenuKey=RightKey
| |
| − | | |
| − | # You can rearrange the settings here.
| |
| − | # If your device is broken, have a look at server/drivers/lcdm001.h
| |
| − | | |
| − | | |
| − | | |
| − | ## HNE LCTerm driver ##
| |
| − | [lcterm]
| |
| − | Device=/dev/ttyS1
| |
| − | Size=16x2
| |
| − | | |
| − | | |
| − | | |
| − | ## LIRC input driver ##
| |
| − | [lirc]
| |
| − | | |
| − | # Specify an alternative location of the lircrc file [default: ~/.lircrc]
| |
| − | #lircrc=/etc/lircrc.lcdproc
| |
| − | | |
| − | # Must be the same as in your lircrc
| |
| − | #prog=lcdd
| |
| − | | |
| − | | |
| − | | |
| − | ## LIS MCE 2005 driver ##
| |
| − | [lis]
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | # 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100%
| |
| − | #Brightness=1000
| |
| − | | |
| − | # Columns by lines [default: 20x2]
| |
| − | #Size=20x2
| |
| − | | |
| − | # USB Vendor ID [default: 0x0403]
| |
| − | # Change only if testing a compatible device.
| |
| − | #VendorID=0x0403
| |
| − | | |
| − | # USB Product ID [default: 0x6001]
| |
| − | # Change only if testing a compatible device.
| |
| − | #ProductID=0x6001
| |
| − | | |
| − | | |
| − | | |
| − | ##The driver for the VFD of the Medion MD8800 PC ##
| |
| − | [MD8800]
| |
| − | # device to use [default: /dev/ttyS1]
| |
| − | #Device=/dev/ttyS1
| |
| − | | |
| − | # display size [default: 16x2]
| |
| − | #Size=16x2
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=50
| |
| − | | |
| − | | |
| − | | |
| − | ## MSI MS-6931 driver for displays in 1HU servers ##
| |
| − | [ms6931]
| |
| − | | |
| − | # device to use [default: /dev/ttyS1]
| |
| − | Device=/dev/ttyS1
| |
| − | | |
| − | # display size [default: 16x2]
| |
| − | #Size=16x2
| |
| − | | |
| − | | |
| − | | |
| − | ## MTC-S16209x driver ##
| |
| − | [mtc_s16209x]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Set the initial brightness [default: 255; legal: 0 - 255]
| |
| − | Brightness=255
| |
| − | | |
| − | # Reinitialize the LCD's BIOS [default: no; legal: yes, no]
| |
| − | Reboot=no
| |
| − | | |
| − | | |
| − | | |
| − | ## Matrix Orbital driver ##
| |
| − | [MtxOrb]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/ttyS0
| |
| − | | |
| − | # Set the display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
| |
| − | Type=lkd
| |
| − | | |
| − | # Set the initial contrast [default: 480]
| |
| − | # NOTE: The driver will ignore this if the display
| |
| − | # is a vfd or vkd as they don't have this feature
| |
| − | Contrast=480
| |
| − | | |
| − | # Some old displays do not have an adjustable backlight but only can
| |
| − | # switch the backlight on/off. If you experience randomly appearing block
| |
| − | # characters, try setting this to false. [default: yes; legal: yes, no]
| |
| − | hasAdjustableBacklight=no
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=0
| |
| − | | |
| − | # Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
| |
| − | Speed=19200
| |
| − | | |
| − | # The following table translates from MtxOrb key letters to logical key names.
| |
| − | # By default no keys are mapped, meaning the keypad is not used at all.
| |
| − | #KeyMap_A=Left
| |
| − | #KeyMap_B=Right
| |
| − | #KeyMap_C=Up
| |
| − | #KeyMap_D=Down
| |
| − | #KeyMap_E=Enter
| |
| − | #KeyMap_F=Escape
| |
| − | # See the [menu] section for an explanation of the key mappings
| |
| − | | |
| − | # You can find out which key of your display sends which
| |
| − | # character by setting keypad_test_mode to yes and running
| |
| − | # LCDd. LCDd will output all characters it receives.
| |
| − | # Afterwards you can modify the settings above and set
| |
| − | # keypad_set_mode to no again.
| |
| − | keypad_test_mode=no
| |
| − | | |
| − | | |
| − | | |
| − | ## mx5000 driver for LCD display on the Logitech MX5000 keyboard ##
| |
| − | [mx5000]
| |
| − | | |
| − | # Select the output device to use [default: /dev/hiddev0]
| |
| − | Device = /dev/hiddev0
| |
| − | # Time to wait in ms after the refresh screen has been sent [default: 1000]
| |
| − | WaitAfterRefresh = 1000
| |
| − | | |
| − | | |
| − | | |
| − | ## Noritake VFD driver ##
| |
| − | [NoritakeVFD]
| |
| − | # device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
| |
| − | Device=/dev/ttyS0
| |
| − | # Specifies the size of the LCD.
| |
| − | Size=20x4
| |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=50
| |
| − | # set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
| |
| − | Speed=9600
| |
| − | # Set serial data parity [default: 0 (None), legal: 0(=none), 1(=odd), 2(=even)]
| |
| − | Parity=0
| |
| − | # re-initialize the VFD [default: no; legal: yes, no]
| |
| − | Reboot=no
| |
| − | | |
| − | | |
| − | | |
| − | ## Mini-box.com picoLCD (usblcd) driver ##
| |
| − | [picolcd]
| |
| − | | |
| − | # KeyTimeout is the time that LCDd spends waiting for a key press before cycling
| |
| − | # through other duties. Higher values make LCDd use less CPU time and make
| |
| − | # key presses more detectable. Lower values make LCDd more responsive but a
| |
| − | # little prone to missing key presses. 500 (.5 second) is the default and a
| |
| − | # balanced value.
| |
| − | KeyTimeout=500
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | Brightness=1000
| |
| − | | |
| − | # Set the initial contrast [default: 1000; legal: 0 - 1000]
| |
| − | Contrast=1000
| |
| − | | |
| − | # Light the keys? i[default: on; legal: on, off]
| |
| − | Keylights=on
| |
| − | | |
| − | # If Keylights is on, the you can unlight specific keys below:
| |
| − | # Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys.
| |
| − | # There is no LED for the +/- keys. This is a handy way to indicate to users
| |
| − | # which keys are disabled. [default: on; legal: on, off]
| |
| − | Key0Light=on
| |
| − | Key1Light=on
| |
| − | Key2Light=on
| |
| − | Key3Light=on
| |
| − | Key4Light=on
| |
| − | Key5Light=on
| |
| − | | |
| − | # Host name or IP address of the LIRC instance that is to receive IR codes
| |
| − | # If not set, or set to an empty value, IR support is disabled.
| |
| − | #LircHost=127.0.0.1
| |
| − | | |
| − | # UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535]
| |
| − | LircPort=8765
| |
| − | | |
| − | # Duration in jiffies of the synthesized sync pulse [default: 64; 0 to suppress]
| |
| − | LircSync=64
| |
| − | | |
| − | # Duration in jiffies of the synthesized gap; 0 to suppress, default 2048.
| |
| − | # This is really the fixed duration of an entire IR command; individual pulse/space
| |
| − | # durations are deducted from this to determine the duration of the trailing gap.
| |
| − | LircLength=2048
| |
| − | | |
| − | | |
| − | | |
| − | ## Pyramid LCD driver ##
| |
| − | [pyramid]
| |
| − | | |
| − | # device to connect to [default: /dev/lcd]
| |
| − | Device=/dev/ttyUSB0
| |
| − | | |
| − | | |
| − | | |
| − | ## Seiko Epson 1330 driver ##
| |
| − | [sed1330]
| |
| − | | |
| − | # Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
| |
| − | Port=0x378
| |
| − | | |
| − | # Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
| |
| − | # Note: Currently only tested with G321D & SP14Q002.
| |
| − | Type=G321D
| |
| − | | |
| − | # Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
| |
| − | CellSize=6x10
| |
| − | | |
| − | # Select what type of connection [legal: classic, bitshaker; default: classic]
| |
| − | ConnectionType=classic
| |
| − | | |
| − | | |
| − | | |
| − | ## Seiko Epson 1520 driver ##
| |
| − | [sed1520]
| |
| − | | |
| − | # Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
| |
| − | Port=0x378
| |
| − | | |
| − | | |
| − | | |
| − | ## serial POS display driver ##
| |
| − | [serialPOS]
| |
| − | | |
| − | # Device to use in serial modea [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Specifies the size of the display in characters. [default: 16x2]
| |
| − | Size=16x2
| |
| − | | |
| − | # Set the communication protocol to use with the POS display.
| |
| − | # [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
| |
| − | Type=AEDEX
| |
| − | | |
| − | # communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
| |
| − | Speed=9600
| |
| − | | |
| − | | |
| − | | |
| − | ## Serial VFD driver ##
| |
| − | ## Drives various (see below) serial 5x7dot VFD's. ##
| |
| − | [serialVFD]
| |
| − | | |
| − | # Specifies the displaytype.[default: 0]
| |
| − | # 0 NEC (FIPC8367 based) VFDs.
| |
| − | # 1 KD Rev 2.1.
| |
| − | # 2 Noritake VFDs (*).
| |
| − | # 3 Futaba VFDs
| |
| − | # 4 IEE S03601-95B
| |
| − | # 5 IEE S03601-96-080 (*)
| |
| − | # 6 Futaba NA202SD08FA (allmost IEE compatible)
| |
| − | # 7 Samsung 20S207DA4 and 20S207DA6
| |
| − | # 8 Nixdorf BA6x / VT100
| |
| − | # (* most should work, not testet yet.)
| |
| − | Type=0
| |
| − | | |
| − | # "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
| |
| − | use_parallel=no
| |
| − | | |
| − | # Number of Custom-Characters [default: displaytype dependent]
| |
| − | #Custom-Characters=0
| |
| − | | |
| − | # Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
| |
| − | Port=0x378
| |
| − | | |
| − | # Set parallel port timingdelay (us). Used in parallelmode only. [default: 2; legal: 0 - 255]
| |
| − | #PortWait=2
| |
| − | | |
| − | # Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
| |
| − | Device=/dev/ttyS1
| |
| − | | |
| − | # Specifies the size of the VFD.
| |
| − | Size=20x2
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 0 - 1000]
| |
| − | # (4 steps 0-250, 251-500, 501-750, 751-1000)
| |
| − | Brightness=1000
| |
| − | # Set the initial off-brightness [default: 0; legal: 0 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | # (4 steps 0-250, 251-500, 501-750, 751-1000)
| |
| − | OffBrightness=0
| |
| − | | |
| − | # set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
| |
| − | Speed=9600
| |
| − | | |
| − | # enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
| |
| − | #ISO_8859_1=yes
| |
| − | | |
| − | | |
| − | | |
| − | ## shuttleVFD driver ##
| |
| − | [shuttleVFD]
| |
| − | # No options
| |
| − | | |
| − | | |
| − | | |
| − | ## stv5730 driver ##
| |
| − | [stv5730]
| |
| − | | |
| − | # Port the device is connected to [default: 0x378]
| |
| − | Port=0x378
| |
| − | | |
| − | | |
| − | | |
| − | ## SVGAlib driver ##
| |
| − | [svga]
| |
| − | | |
| − | # svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
| |
| − | #Mode=G640x480x256
| |
| − | | |
| − | # set display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # Set the initial contrast [default: 500; legal: 0 - 1000]
| |
| − | # Can be set but does not change anything internally
| |
| − | Contrast=500
| |
| − | | |
| − | # Set the initial brightness [default: 1000; legal: 1 - 1000]
| |
| − | Brightness=1000
| |
| − | | |
| − | # Set the initial off-brightness [default: 500; legal: 1 - 1000]
| |
| − | # This value is used when the display is normally
| |
| − | # switched off in case LCDd is inactive
| |
| − | OffBrightness=500
| |
| − | | |
| − | | |
| − | | |
| − | ## Text driver ##
| |
| − | [text]
| |
| − | # Set the display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | | |
| − | | |
| − | ## Toshiba T6963 driver ##
| |
| − | [t6963]
| |
| − | | |
| − | # set display size [default: 20x6]
| |
| − | Size=20x6
| |
| − | | |
| − | # port to use [default: 0x378; legal: 0x200 - 0x400]
| |
| − | Port=0x378
| |
| − | | |
| − | # Is ECP mode on? [default: yes; legal: yes, no]
| |
| − | #ECPlpt=yes
| |
| − | | |
| − | # Use graphics? [default: no; legal: yes, no]
| |
| − | #graphic=no
| |
| − | | |
| − | | |
| − | | |
| − | ## Tyan Barebones LCD driver (GS10 & GS12 series) ##
| |
| − | [tyan]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Set the communication speed [default: 9600; legal: 4800, 9600]
| |
| − | Speed=9600
| |
| − | | |
| − | # set display size [default: 16x2]
| |
| − | Size=16x2
| |
| − | | |
| − | | |
| − | | |
| − | ## ELV ula200 driver ##
| |
| − | [ula200]
| |
| − | | |
| − | # Select the LCD size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # If you have a non standard keypad you can associate any keystrings to keys.
| |
| − | # There are 6 input key in the CwLnx hardware that generate characters
| |
| − | # from 'A' to 'F'.
| |
| − | #
| |
| − | # The following it the built-in default mapping hardcoded in the driver.
| |
| − | # You can leave those unchanged if you have a standard keypad.
| |
| − | # You can change it if you want to report other keystrings or have a non
| |
| − | # standard keypad.
| |
| − | # KeyMap_A=Up
| |
| − | # KeyMap_B=Down
| |
| − | # KeyMap_C=Left
| |
| − | # KeyMap_D=Right
| |
| − | # KeyMap_E=Enter
| |
| − | # KeyMap_F=Escape
| |
| − | | |
| − | | |
| − | | |
| − | ## Wirz SLI LCD driver ##
| |
| − | [sli]
| |
| − | | |
| − | # Select the output device to use [default: /dev/lcd]
| |
| − | Device=/dev/lcd
| |
| − | | |
| − | # Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
| |
| − | Speed=19200
| |
| − | | |
| − | | |
| − | | |
| − | ## OnScreen Display using libxosd ##
| |
| − | [xosd]
| |
| − | | |
| − | # set display size [default: 20x4]
| |
| − | Size=20x4
| |
| − | | |
| − | # Offset in pixels from the top-left corner of the monitor [default: 0x0]
| |
| − | Offset=200x200
| |
| − | | |
| − | # X font to use, in XLFD format, as given by "xfontsel"
| |
| − | Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
| |
| − | | |
| − | # EOF
| |
| − | }}}
| |
| | [[Category:log]] | | [[Category:log]] |
